Install a Pendant Light in 5 Easy Steps
Introduction
Lighting is one of the most important elements in any interior space. Our handmade lampshades & hanging pendants are stylish art pieces with enough “flare” to light up any room. Constructed with sleek metallic hardware and high quality fabrics, these decorative accessories are both functional and beautiful.
Tool Required
▪ Wire stripper/cutter
▪ Screwdriver
▪ Measuring Tape
Materials Required
▪ Wire Nuts
▪ Pendant Light
Pendant lights are stylish art pieces with enough “flare” to light up any room.
Project Overview
WORKING TIME: 30 mins
TOTAL TIME: 30 mins
SKILL LEVEL: Beginner
Install a Pendant Light in 5 Easy Steps

Step 1
Disconnect the power to the room
▪ Turn off the breaker switch at the distribution panel.
▫ Pro tip: Double check that power has been disconnected by using an electrical current detector.

Step 2
Attach cross bar to the junction box
▪ The cross bar connects the bezel to the electrical box and provides the strength needed to support the light fixture.
▪ Attach the cross bar to the junction box with the supplied screws.

Step 3
Connect electrical wires as shown in diagram
▫ Pro tip: Strip electrical wires a max of 7mm (if using quick connects).

Step 4
Install ceiling rose using supplied screws.

Step 5
Check for functionality
▪ Attach the shade cover, if applicable, and use a light bulb of appropriate wattage for that fixture.
Turn the power back on and make sure the light works.
ADD FLARE TO ANY ROOM